Internet companies have been inspired by Xiaomi this year and are frequently involved in the hardware field. This makes traditional hardware companies that are already paralyzed on the ice, especially in the TV industry. Older companies such as Skyworth, Changhong, and TCL have received the impact of the Internet army and have a small profit margin. Small, the price can not be sold, and the recent giant screen flat-panel TV prices showed a straight downward trend, it is shopping malls such as the battlefield.
What are the advantages and disadvantages of Internet TV compared to traditional TV? I think the advantage of Internet TV is that it has built-in own video resources. It is richer in resource than traditional TV. We can get more video resources, and we have random VIPs with our own video platform. Hardware can make money without making money. The money, this is a major trend, but also hope that traditional enterprises increase resources, hardware alone is difficult to base.
I personally recommend this to the PPTV-55T home cinema version of the LCD flat-panel TV. The TV uses the LG original 4K IPS hard screen. For LG's panel technology, I still feel at ease, but in recent years the domestic screen is also Very good, and more cost-effective. Home Theater Edition also comes with a Sound-Bar sound system, although not as a separate power amplifier, but more ordinary TV, it should be a qualitative leap.
The center of the TV box can see the image of the product, modeling Founder. Information such as panel dimensions and resolution is indicated on the box. 
Unpacking and disassembling is very messy and there is really no way to take a picture. The positive recognition of this TV is not very high, and it is the same as that of LCD TVs. This is nonsense.
Only at the bottom can see the LOGO of PPTV. To tell the truth, I don't think there is any temperament at all. I like the sign of Skyworth most. The English letters are good or not. The border width is acceptable.
From the side, this TV has a high degree of recognition, because I haven't seen a television with a wedge-shaped design like this. I like this design more. It looks more mechanical. The metal frame is used, and the metal texture cannot be replaced by any material. The overall work is still OK.
The side of the rear looks a little abrupt transition of the metal frame and the back plastic shell, but fortunately this is a TV, we usually do not pay attention to the back of the plastic shell. I think that you can brush the plastic shell with a layer of metal paint, so it looks like it will be higher.
The wedges involved look pretty good. The Chinese goods are getting better and better. Don't you know whether they are domestic products or not?
There is a large PPTV logo on the back and various expansion jacks in the lower right corner. I do not give up on the design of the back, anyway, usually can not see.
This raised thing is really unobtrusive, and everyone guesses what this is.
Oh yeah, the USB port on the center of the fuselage. I was thinking that if I plug in a USB device, I wouldn't be a bit uncoordinated. I could just put it on the side of the camera. In short, I don't like this design.
The back wall screws are not used by myself.
TV cooling is also a problem that cannot be ignored. If the heat is not good, it will greatly affect the life of the whole machine. We can look at the TV's heat outlet, the gap is still relatively large, heat should not worry.
The various sockets in the lower right corner are network interfaces, three HDMI interfaces, VGA interfaces, and audio and video interfaces from left to right. This TV gives three HDMI interfaces is still relatively conscience, and one is HDMI2.0. There are VGA interface, you can connect to the computer or something.
Side of the fuselage also has a USB interface and SD card slot. A 2.0 A 3.0 I think the USB interface above the fuselage can be completely removed, it is not beautiful.
Overall, the screen share is higher. However, no physical power button was found. With accustomed to the traditional television, or hope that you can add a key to the entity, that would feel more power.
The Sound-Bar sound system is delivered on a random basis with speakers above it and subwoofers below.
Side switch control buttons, control panel material and TV material, metal wire drawing process.
You can vaguely see the speaker unit inside. There are 6 horns, 4 are 2.5-inch full-range tweeters, and the remaining two are 1.5-inch high-quality private film speakers.
Sound-Bar Speaker Interface The TV-specific 8PIN interface, AUX interface, fiber/COA interface is actually several interfaces I do not know what to use.
Subwoofer this LOGO is too central. I think that decentralization is the most appropriate.
The cavity outlet is on the back. There are control buttons and so on.
Bass diaphragm at the bottom. The parameter is 6.5 inches. It doesn't look too small and is looking forward to his bass performance.
Accessories: base and power cord.
The base needs to be assembled. I think that giving an overall bracket will have more grades.
The rubber pad of the base seems to be a bit small. I think the bigger ones can better protect the TV cabinet. Don't worry about your friends, you can put some paper below.
Metal cutting edge, bevel cutting. Metal texture can be well reflected.
The plastic of the remote control looks a little cheap, or does it like to penetrate the remote control of the TV. There are many kinds of digital buttons.
Speaker cable.
The bottom bracket screws look a bit thin and I don't know if I can fix the TV well.
After the stand is put up, it looks like.
Hanging brackets on the back. Still think the material is a bit thin.
I finally chose a wall-mounted installation. Power on the PPTV boot screen.
The PPTV-55T TV is equipped with its own PPOS. Nowadays, there are too many OS's and they all feel the same. Nothing more than Android.
I would like to recommend you to a friend who likes the game. PPTV also bought a 5 year La Liga broadcasting rights and has a special ball game broadcast channel. This is very good.
PPTV login interface.
System interface after logging in. It feels like Galaxy TV. A one-year PPTV VIP was sent.
The Bureau of Radio, Film and Television played an arduous task on the Android system. I also painstakingly installed third-party software to test the overall performance. The quad-core CPU is the MTK5508 Cortex-A17 core. There are actually only 1.33G of memory available for 2G memory. Storage space 16G, actual 11.59G available. The GPU is an eight-core T760 and the system version is Android 4.4.4. Hardware score 6173. Should be considered good.
The screen can see light leakage in a dark environment. But within the acceptable range, it is better than Skyworth used before.
The chromatogram shows a natural transition. The colors are displayed.
With a screen score of 100 points, LG can still be trusted.
The display of various pictures, not 4K, is 1080P.
Details are clearly displayed. Brighter colors. It's more colorful than the picture itself, but it's more eye-pleasing.
Red saturation is too high.
The same red saturation is too high.
To sum up, I like this TV.
Mainly like his wedge design and metal frame.
I don't think it's a good place to have no physical power button. The LED power light under the LGOO is a bit too bright, and the display effect is too high for the red saturation.
Want to start friends can refer to it.
With the development and progress of domestic industry, machining has changed a lot, Precision Machining technology has come to the fore, many industries such as household appliances, automobiles, hardware and medical manufacturing products more or less use precision parts. It may be just a component, or it may be a core component in a mechanical device. In a word, it is very important and plays an irreplaceable role.
And these precision parts for precision machining manufacturing there are two processes, one is hot processing and one is cold processing, hot processing is through heat treatment and other ways to make parts in very warm conditions under the biochemical or physical changes to achieve the shape change requirements. And cold processing is at room temperature without chemical and physical changes to achieve shape changes, generally using cutting technology. In the future, on the premise of meeting processing and environmental protection, precision machining will be combined with science and technology to become an important and sustainable science.
Precision Cnc Machining,Cnc Machining Parts,Custom Cnc Machining,Precision Cnc Turning Parts
Tianhui Machine Co.,Ltd , https://www.thcastings.com