The series is available in 14 different models with an output current range of 350-2100 mA. Each model offers 88-90% full load efficiency and is capable of operating over an input voltage range of 90-305Vac and provides high power factor correction (0.95 for an input voltage of 220V). In addition, the LUC-042SxxxDTG (STG) series has been UL, CUL, CE, FCC certified and complies with the Class 2 standard.
The high efficiency of this series of drives allows the product to operate at lower temperatures, effectively increasing drive reliability and extending product life. When the drive case temperature is 60 ° C, 80% load operation, its service life can reach 110,000 hours.
With a wide dimming range (minimum 10%) and unique design of the exterior mechanism, this series of drives is ideal for indoor downlighting projects where visual comfort and installation are critical. Especially suitable for down lighting applications in North America. At the same time, in order to ensure trouble-free operation when applying this product, the series of products are equipped with overvoltage protection, overtemperature protection and short circuit protection.
Infinet said that the LUC-042SxxxDTG (STG) series products are now fully in production and sales.
Optical fiber jumpers are used to make jumpers from equipment to optical fiber cabling links. There is a thicker protective layer, which is generally used in the connection between the optical transceiver and the terminal box, and is used in some fields such as optical fiber communication systems, optical fiber access networks, optical fiber data transmission, and local area networks.
Optical fiber jumper (also known as optical fiber connector) means that both ends of the optical cable are equipped with connector plugs to realize the active connection of the optical path; one end with a plug is called a pigtail. Optical Fiber Patch Cord/Cable is similar to coaxial cable, except that there is no mesh shielding layer. In the center is the glass core through which light propagates. In a multimode fiber, the diameter of the core is 50μm~65μm, which is roughly equivalent to the thickness of a human hair. The single-mode fiber core has a diameter of 8 μm to 10 μm. The core is surrounded by a glass envelope with a lower refractive index than the core to keep the optical fiber in the core. On the outside is a thin plastic jacket to protect the envelope.
The classification and overview of optical fiber patch cords are as follows
Optical fiber jumpers (also known as optical fiber connectors), that is, optical fiber connectors that are connected to optical modules, are also available in many types, and they cannot be used mutually. The SFP Module is connected to the LC fiber optic connector, and the GBIC is connected to the SC fiber optic connector. The following is a detailed description of several commonly used optical fiber connectors in network engineering:
â‘ FC-type fiber jumper: The external strengthening method is a metal sleeve, and the fastening method is a turnbuckle. Generally used on the ODF side (most used on the distribution frame)
â‘¡SC type optical fiber jumper: the connector for connecting the GBIC optical module, its shell is rectangular, and the fastening method is a plug-in latch type, without rotation. (Most used on router switches)
â‘¢ST type optical fiber jumper: commonly used in optical fiber distribution frame, the shell is round, and the fastening method is turnbuckle. (For 10Base-F connection, the connector is usually ST type. Commonly used in optical fiber distribution frame)
â‘£LC type optical fiber jumper: the connector to connect the SFP module, it is made by the easy-to-operate modular jack (RJ) latch mechanism
Patch Cord,Ftth Mm Patch Cord,Simplex Ftth Patch Cord,Sm Ftth Optical Patch Cord
Shenzhen Scodeno Technology Co.,Ltd , https://www.scodenonet.com