There is a running-in period for many things, just like a newly bought car is inevitable at the beginning, there is also a running-in period for a newly bought car. Then there is a saying that the newly bought earphones are "burn-in". But many people don't understand the specific meaning of the machine burn-in, and many people still doubt it. So let's take a closer look at the mystery of the burn-in.
The origin of the machine
The running-in period of speakers and earphones is called "burn in" by insiders. The English name is "burn in". The process of burning in is like opening up the second pulse of Ren and Du. Full firepower is a way to quickly make the equipment aging and stable. Means and methods. It's like a reason to warm up before exercise. Some components, such as transistors, integrated circuits, capacitors, etc., have unstable electrical properties when they are brand new, and they can gradually stabilize after a period of use.
For speakers, the burning of speakers is also an important part of the burning; for headphones, the burning is actually burning the diaphragm folding ring. The new earphone diaphragm folding ring has poor mechanical compliance, resulting in relatively large distortion. After a period of use, the compliance gradually improves, and the distortion will gradually decrease to a normal level.
So what kind of headphones need to be burned?
The purpose of the burn-in is to turn on the earphone; the earphone is like a musical instrument, and there is a process of opening the sound. The sound before the sound is turned on, and the sound is soft and delicate after it is turned on. It should be noted that not all headphones will get excellent sound after boiling, because this is also closely related to the quality of the headphones themselves. The sound of some earphones will change after the cooking is finished, but the effect of some earphones will not be too obvious after the cooking is finished. This is also a normal stage. The purpose of the burn-in is only to accelerate the aging of its diaphragm and quickly enter a stable state. If you blindly think that the burn-in can greatly improve the sound quality, it is a bit metaphysical. Good sound depends on the sound source and other factors to determine together, rather than accelerating the physical performance of the headset itself to be fully realized.
Burn-in method
Boiler is to integrate the electronic components of the machine to a top level in a short period of time, so that the various components can work together to adapt to each other, until a process of harmony.
First of all, the earphones are burned. First, look for a few songs that are more suitable for burns. Various websites have recommendations. The selected songs, it is best to have a wide range and a wide range of songs (not very dry and noisy), find a few more; such as: Hongyan, Qinghai-Tibet Plateau, I miss you three hundred and sixty-five days, When You Say Nothing at All etc. The key is to listen to the song you want to listen to. Mainly grasp a gradual process.
Then plug in the earphones on the device, adjust the volume of the device to 1/3 of the total volume, and choose the volume on the earphones that is most comfortable for you to listen to, and then continue to play the music you are looking for in a continuous loop, usually half a time each time. One hour an hour, not too long, not too short, burn the machine 3 times a day.
After a period of time, adjust the volume of the device to 2/3, and continue the above burn-in steps. Don't burn the machine excessively. Generally, the machine can be burned to a satisfactory level in two to three weeks. In this way, the machine is almost ready, just listen to the music normally afterwards. The best burn-in is the accumulation of time. Generally, take good care of your earphones, and you can have earphones with good sound quality in the later stage. Then you can listen to the song with more sense.
Welding diodes are available for medium frequency (over 2KHz) and high frequency (over 10khz) applications.They have very low on - state voltage and thermal resistance. Welding diodes are designed for medium and high frequency welding equipment and optimized for high current rectifiers. The on-state voltage is very low and the output current is high.
Welding Diode,Disc Welding Diode,3000 Amp Welding Diode,High Current Rectifier Welding Diode
YANGZHOU POSITIONING TECH CO., LTD. , https://www.cnchipmicro.com