Mobile phone film tips

Mobile phone film tips

1, first clean your hands of dust and grease, wash with liquid soap first.

2. Use a cloth or lint-free cloth to wipe the surface of the phone with a small amount of clean water, clean the dust, fingerprints, etc. on the surface.

3, tear open one side of the protective film, and then align the mobile phone, align the top and left and right sides and stick the film.

4, in the film, as far as possible to maintain uniform speed, the emergence of bubbles, etc. Please pull back some less to ensure that the film surface without bubbles. Then use a wool felt scraper or a cushioned scraper to avoid scratching. Slowly apply the film little by little and press it on the surface of the mobile phone. In this case, there will be very little bubbles immediately.

5. After patching, repair the air bubbles in some areas. With a hard card, credit card, etc., wrap the credit card with a soft cloth that just wipes the screen, and then slowly pull out the force to blow the bubble out of the edge.

6, if there are small particles of dust on the surface, etc., please open the block, stick the particles with adhesive tape, and then paste the film.

Water Cooling CPU Heat Sinking

CPU water-cooled heat sink refers to the use of liquid driven by a pump to forcibly cycle away the heat from the heat sink. Compared with air cooling, it has the advantages of quietness, stable cooling, and less dependence on the environment.
The heat dissipation performance of a water-cooled radiator is directly proportional to the flow rate of the cooling liquid (water or other liquids) in it, and the flow rate of the cooling liquid is also related to the power of the cooling system water pump. Moreover, the heat capacity of water is large, which makes the water-cooled refrigeration system have good heat load capacity. Equivalent to 5 times the air cooling system, the direct benefit is that the CPU operating temperature curve is very smooth. For example, systems using air-cooled heat sinks may experience temperature spikes in a short period of time when running programs with high CPU loads, or may exceed the CPU warning temperature, while water-cooled heat dissipation systems have much smaller thermal fluctuations due to their large thermal capacity

Water cooling

Guangzhou Lufeng Electronic Technology Co. , Ltd. , https://www.lufengelectronics.com