Abstract : This article describes the fabrication and application of a mobile box (M-Chamber) for high-power measurement of laboratory benches such as short-circuit measurements, current limiting, and large-load application measurements. Most laboratory power supplies do not have the ability to provide high currents, so it is necessary to apply capacitors in the bench unit to boost short-pulse power. However, connecting an additional capacitor bank to the device will indirectly cause device clutter and does not comply with the Occupational Safety and Health Act (OSHA). The principle of the mobile box is to place the discharge resistor in the box, which is a safe design and keeps the table device clean and tidy. In addition, this also helps the charged capacitor to discharge in a short time, avoiding user accidents. An experimental study was conducted on the discharge time of the capacitor, and the evaluation of the characteristics of the capacitor in real-time applications was completed.
I. Introduction
In the new product development phase, electrical laboratory characterization plays an important role in verifying the electrical function of the equipment, ensuring that its function meets the data sheet specifications or customer requirements. PROFETTM is a high current product manufactured by Infineon Technologies, Inc., a high-end driver with protection. PROFETTM is a typical MOSFET with enhancements (shown in Figure 1) that enhances its performance in high-end driver applications. PROFETTM devices typically involve high current test parameters. High current test parameters such as short circuit measurements, current limit and various high load application measurements.
Traditional high current measurement devices include device under test (DUT), power supplies, external triggers, oscilloscopes, 150mF/100V capacitor banks, and discharge resistors. The discharge resistance is necessary to improve the discharge time of the capacitor, which avoids accidental electric shock events during capacitor discharge. There is now a way to improve such a device by fabricating a moving case that houses the electrical components of the discharge resistor and the device under test (DUT).
Figure 1 PROFETTM is a typical MOSFET with enhancement
Second, the measuring device
This section presents an example of a high current measurement, specifically an example of a short circuit representation with a function generator that has been equipped with the recommended protection function as an external trigger.
As shown in Figure 2(a), the short circuit characterization device includes a supply voltage, a function generator for triggering pulses, and a plurality of probes connected to the oscilloscope. The power supply supplies voltage to the device's power (Vs) pin, while the function generator generates pulses that are passed to the device's input (IN) pin.
Figure 2 (a) Circuit schematic for short circuit characterization
| About Enameled Copper Wire |
Henan HuaYang Copper Group Co.,Ltd specialized in producing enameled Copper Wire for 25 years ,Products including PEW enameled copper wire, Eiw Enameled Copper Wire, EI/AIW enameled copper wire, EIW/A Enameled Copper Wire,and Enameled and glass-fiber copper wire.
According to the characteristics of motor, transformer, automotive electrical and high-speed winding machine, we have advantages in resilience, breakdown voltages and have imported machine to protect the quality of Enameled copper wire.
After 25 years of efforts, we have good reputation from foreign and domestic.
Product Feature.
Enameled
Copper Wire
Conductor
Copper
Dimension
Diameter(mm):
0.15 ~ 3.0
Thermal
Class(℃)
130(Class
B); 155(Class F); 180(Class H); 200(Class C); 220(Class C+);
Standard
IEC;
Packing
PT4
– PT200 or ply-wood spool
Application
Transformer;
motor; generator; modern instrument; welding machine and so on
About
Factory.
For quality of Enameled Copper Wire, we have imported machine and R&D. we checked every spools of products after finishing the products.
'Quality and efficiency' is our principle.
Enameled Copper Wire
Enameled Copper Wire,Enameled Magnetic Copper Wire,Rewding Enameled Copper Wire,Winding Enameled Copper Wire
HENAN HUAYANG ELECTRICAL TECHNOLOGY GROUP CO.,LTD , https://www.huaonwire.com