1. There should be obvious signs on the outer packaging of the product. The content should include: product name, model, specification, manufacturer name, project name, name of the receiving unit, etc.;
2. When the packaging of the product adopts the carton packaging type, it should meet the requirements of GB/T13384;
3. Product certification, factory inspection report, technical documents, etc. should be provided with the package. The factory number and location of the cabinet should be verified on the 3C website, must be the product of the factory, and must not be produced by other parties or in other places.
4. The products to be supplied must be witnessed and sent to the Technical Supervision Bureau for inspection. The inspection fee shall be borne by the supplier.
5. The product of the supplier should be approved by the local power supply department and ensure that its products are passed once at the electrical acceptance.
6. Unfinished matters shall be implemented in accordance with relevant national standards, technical regulations and requirements of the Municipal Power Supply Bureau.
Newmax Electronics Co.,Limited , https://www.advvape.com