Product introduction:
The GH-208SF6 Decomposition Product Tester provides a simple on-site inspection method for SF6 decomposition products. During use, it is connected to a pressurized gas chamber filled with SF6 gas equipment, allowing SF6 gas to flow through the electrochemical sensor at a certain flow rate, and the instrument directly measures the content of the main decomposition products of SF6 gas.
The sensors are all based on the British Alpha sensor and have a long-life design to ensure the accuracy and reproducibility of the measurement results.
Main applications: fault location, routine detection, PD monitoring, gas purification/filtration monitoring, fault high voltage contact inspection, SF6 decomposition product detection, inspection of decomposition products in the switch.
The sensors are all based on the British Alpha sensor and have a long-life design to ensure the accuracy and reproducibility of the measurement results.
Main applications: fault location, routine detection, PD monitoring, gas purification/filtration monitoring, fault high voltage contact inspection, SF6 decomposition product detection, inspection of decomposition products in the switch.
Product nickname:
SF6 gas decomposition product tester
Features:
1. Long life detection component
2. SF6 decomposition product tester does not need to directly measure color tubes and sensors
3. High precision and good repeatability
4. Built-in regulator valve and electronic mass flowmeter
5. Large LCD display
6. Lightweight and portable, easy to use
7. Rechargeable battery power supply, AC and DC
8. Fast response, almost no warm-up waiting
9. Measurement results are not affected by ambient temperature
2. SF6 decomposition product tester does not need to directly measure color tubes and sensors
3. High precision and good repeatability
4. Built-in regulator valve and electronic mass flowmeter
5. Large LCD display
6. Lightweight and portable, easy to use
7. Rechargeable battery power supply, AC and DC
8. Fast response, almost no warm-up waiting
9. Measurement results are not affected by ambient temperature
Technical Parameters:
1. Gas measurement range: SO2: 0-2000 μl/l
H2S: 0-1000 μl/l
CO: 0 — 1000μl/l
2. Sensitivity: SO2: ±0.5μl/l
H2S: ±0.5μl/l
CO: ±0.5μl/l
3. Response time: 45s
4. Sample: Built-in regulator valve, filter, flow meter;
A set of 3.6 m sampling tubes and joints.
5. Working temperature: -40 ° C ~ 50 ° C
6. Power source: 220VAC±10%50Hz, AC and DC dual-use: overcharge protection, continuous operation is not less than 10 hours;
7. Read: Large LCD display, resolution 0.1% SF6;
8. Size: 258 (mm) × 240 (mm) × 88 (mm);
9. Weight: about 2.4 kg;
10. Sampling flow rate: 0.01~1L/min.
USB Modem,Modem 4G,Wireless Modem,Cat4 Unlock Modem
Shenhzhen Tongheng Weichuang Technology Co., Ltd , https://www.thwclte.com