On the afternoon of March 7, at the 2nd Global Brand Summit of Haier Appliances, Haier revealed an original innovative product, the “No Bucket†washing machine, which will be released in the whole house care solution.
At present, the washing machine of the world is composed of two round inner barrels and outer barrels, and the Haier “no barrel†washing machine cancels the washing of the outer tub, and only one inner barrel can complete all the functions of the current washing machine, thereby solving the root cause. The problem that the traditional washing machine stains the outer wall of the inner tub during use and breeds bacteria. Previously, Haier achieved clean interior barrels through “no-clean†technology. Now, by eliminating the outer barrel, it has truly achieved “zero cleaning†and achieved revolutionary innovation.
The pulsator washing machine is divided into an outer barrel and an inner barrel, and two barrels are nested together for use. During the washing process, the water flows back and forth between the inner and outer barrels, causing dirt in the water and impurities on the clothes to adhere to the inner wall of the barrel. In addition, the environment in which the washing machine is placed is humid, and the bacteria grows a lot. In the past, we have formed the dirty barrels, so we need to clean them by means of cleaning agents or disassembling the inner tub.
Haier's "no-clean" washing machine was invented to solve the problem of the dirty barrel of the traditional washing machine. As early as 2014, Haier developed a no-clean washing machine. Its pioneering “wisdom ball†technology can realize “washing and washing at the same time†through physical cleaning. In 2016, Haier washing machine innovative “no water between barrels†technology, let The inner and outer barrels of the washing machine are in a "fully isolated" state, and the dirt between the barrels is cut off and the secondary barrels are contaminated. Now, Haier has directly revolutionized from "no-clean" technology into "zero-cleaning" technology. “No-cleaning†can replace manual cleaning to keep the washing machine clean, but there is also a process of producing stains, and “zero-cleaning†technology directly eliminates the possibility of dirt.
This new product not only completely solves the dirt deposition between the inner and outer barrels, but also increases the washing capacity by 20%, water saving by 30%, water consumption, power consumption, wear rate, washing degree and noise value in the same volume. It has reached the international leading level and realized the innovation of washing mode. The three iterations of Haier washing machine in the past four years have also ushered in a breakthrough.
Haier's “no barrel†no-clean washing machine has once again aroused strong interest from the industry and users, which reflects Haier's precise grasp of user needs. In the ever-changing era of mobile internet, under the guidance of the “one person in one†mode, Haier has always been user-centered, providing high-quality, differentiated products with continuous iterations to provide a good washing experience for consumers around the world. Development and transformation have set a benchmark.
We provide quick-turn injection molding by many types of materials, like ABS, PA66, PBT, TPU, TPE, PVC, PE, NYLON 6, PC, silicone, TPE, EPDM, PUR, etc. Special for some plastic parts. Our advantages in internal prototyping, bridge tooling and short-run manufacturing, which can eliminate the costly and time-consuming for customers a lot.
ETOP experienced to support one-stop cable assembly solution service, including wire harness, palstic enclosure, silicone, metal, PCBA, etc.
Injection Molding Parts,Plastic Injection Molding,Low Cost Plastic Injection Molding,Plastic Mold Injection Molding
ETOP WIREHARNESS LIMITED , https://www.oemwireharness.com