Ce RoHS Dlc ETL 50W LED 2X4 Troffer Light Retrofit Kit 6500lm 180W HPS

CE ROHS DLC ETL 50W LED 2x4 Troffer Light,LED 2x4 Troffer,LED 2x4 Troffer Retrofit Kit, 6500lm,180W HPS Equiv,available in 3,500K to 5,700K, Perfect for use in commercial applications such as offices, schools, retail locations, hospitals, and more.Easy-to-install upgrade to LED lighting in existing recessed troffers,replaces traditional fluorescent troffers.
STRUCTURE, MATERIALS, & FEATURES
1. Beam angle: 120 degrees
2. Incandescent/ MH/HPS/HID/MHL/CFL lamp retrofit
3. Precision Die Cast Aluminum Housing
4. Durale Chip and Fade Resistant Powder Coat Finish
5. Energy saving up to 70%-80%
6. Wide colour availability in degrees Kelvin(K),2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW
7. 50,000 hours, 5 Years Warranty
8. Easy Installation
9. UL listed power supply, ISO CE ROHS listed
Additional Information
SENSOR MODULE
PIR sensor
Dimming Function:
1.on @ night light
2.off@day light
3.100% on when motion detected(in night).hold time 40"(typical).if no new
motion trigger.
Note:1sensor @ 1 lamp only.
 
Dailight sensor
It supplies a simple and effective solution for daylight harvesting.Connecting to
1-10V interface and using photocell to measure ambient lux level and
automatically calculate how much artificial light is needed,and then convert the
amount of light to 1-10V dimmable control gears(ballasts or LED drivers).1-10V
dimmable control gears adjust the lighting output according to the signal from
the daylight sensor.
Note:1sensor @ 20 lamps Max
 
Microwave motion available
1.As built-in daylight sensor can read brightness value,the sensor dose not
swith on the light if with sufficient natural light.
2.Switch on the light on detection of movement,and switch off after ahold time
when there is no motion detected.
Note:1sensor @ 10 lamps Max
PICTURES SHOW
PACKAGE
 
- See more at: http://www.bbier.com/50W-LED-2x4-Troffer-Light-1231.html#sthash.BuJjhyp0.dpuf












 

Waterproof Vertical Mount D-Sub Connectors

waterproof D-sub system is IP67 rated. These panel-mount connectors are available in solder cup as well as right angle and vertical PCB mount types. The cable-mount connector kit includes the connector, which has solder cup contacts. These connectors are available in 9-, 15-, and 25-positions in standard density and 15-, 26-, and 44-positions in high density. The recommended wire gauge for the solder cup connector is 22 AWG to 26 AWG.

These panel-mount waterproof D-subs are designed for rear-mount applications in panels that are up to 2.0 mm thick. They come with two sets of jackscrews. One jackscrew set is 5 mm long for panel thickness up to 1.2 mm, and the other is 6 mm long for panel thicknesses from 1.2 mm to 2.0 mm.

Cable mount D-sub connector kits come with the backshell, seal, thumbscrews, and solder cup connector. They are also easy to install. Simply fit the cable through the backshell, terminate the wire to the solder cup contacts, and hand tighten the cable nut on the rear of the backshell. The backshell will seal a particular range of cable diameters depending on the position count of the connector. Consult the datasheet for specific cable diameter ranges.

Specifications

Current rating

Standard D-sub: 5 A

Hi-density D-sub: 2 A

Breakdown voltage: ≥ AC 500 V/1 minute

Insulation resistance: ≥ 500 MΩ @ DC 500 V

Contact resistance: ≤ 20 mΩ

Material

Contacts: copper alloy, gold-plated

Connector body: nylon 9T or PBT, UL Recognized

Shell: steel, nickel-plated

Applications

DV camcorder

DV VTR

Non-linear editing system

Broadcast monitor

Betacam deck

Antenk waterproof d-sub connectors including

Panel Mount Waterproof D-Sub Connectors:
Water Proof D-Sub, Standard Density, Male, Panel Mount
Water Proof D-Sub, Standard Density, Female, Panel Mount
Water Proof D-Sub, Standard Density, Female, PCB Mount
Waterproof solder cup, stamped & formed contact D-sub waterproof
solder cup,machined contacts D-sub waterproof

Vertical Mount Waterproof D-Sub Connectors:
Combo Power + Signal D-Sub Connector, Vertical Mount, Pluge Type,

right angle D-sub waterproof
IP67 rated Combo power D-sub waterproof

Standard Density, Waterproof Vertical Mount D-Sub Connectors, High Density Waterproof Vertical Mount D-Sub Connectors,IP67 D-Sub Connectors Vertical Mount,Board Mount Waterproof Vertical Mount D-Sub Connectors

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com