24 Port UTP Cat5e Patch Panel/Cat5e Pudi Patch Panel/Distribution Frame

24 ports unshielded distribution frame (all-in-one)

Product application:
 It is mainly used in the management room and used for terminating the horizontal cable and switch equipment, so as to achieve the purpose of information transmission.

Product Features:
1. Modular design, 1U mode "4 in 1" PCB module installation group, each module group has 6 ports; 0.5 U mode "3 in 1" PCB module installation group, each module group has 8 ports;
2. Each module installation group can be disassembled from the front of distribution frame, which is convenient for management and maintenance.
3. The steel galvanized wire trimming frame attached can provide a solid and stable line space, and it's suitable for all kinds of installation environment.
4. The sign system in front is available, which is convenient for management and maintenance.
5. SECC or SPCC high quality steel material
6. JACK gold needle 50u" gold plating is carried out, the unique design is provided to facilitate the information transmission, and the anti-oxidation performance is strong.
7. 180º and Dual Type routing way
8. Cat.5e/Cat.6/Cat.6A series is provided, 0.5U and 1U type standard 19" rack mounting

Application standard
ISO/IEC11801; ANSI/TIA/EIA568C.2; YD/T 926.3

Technical Parameters
Certificate:


Package:





  24 ports unshielded distribution frame (all-in-one)

Product application:
 It is mainly used in the management room and used for terminating the horizontal cable and switch equipment, so as to achieve the purpose of information transmission.

Product Features:
1. Modular design, 1U mode "4 in 1" PCB module installation group, each module group has 6 ports; 0.5 U mode "3 in 1" PCB module installation group, each module group has 8 ports;
2. Each module installation group can be disassembled from the front of distribution frame, which is convenient for management and maintenance.
3. The steel galvanized wire trimming frame attached can provide a solid and stable line space, and it's suitable for all kinds of installation environment.
4. The sign system in front is available, which is convenient for management and maintenance.
5. SECC or SPCC high quality steel material
6. JACK gold needle 50u" gold plating is carried out, the unique design is provided to facilitate the information transmission, and the anti-oxidation performance is strong.
7. 180º and Dual Type routing way
8. Cat.5e/Cat.6/Cat.6A series is provided, 0.5U and 1U type standard 19" rack mounting

Application standard
ISO/IEC11801; ANSI/TIA/EIA568C.2; YD/T 926.3

Technical Parameters
Certificate:


Package:





 

3.5mm Wire To Board Connectors

3.5mm Wire To Board Connectors.Standards
Wire-to-board connectors carry approvals from various national and international organizations. In North America, they often bear marks from Underwriters Laboratories (UL) and/or the Canadian Standards Association (CSA).
A wire to board connector for the European marketplace should comply with the Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives from the European Union (EU). Wire-to-board connectors that comply with other requirements are also available.
BS 9526 N0001 - Specification for multi-contact edge socket electrical connectors.

3.5mm Wire To Board Connectors

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com